1.A wort chiller is a device that allows the homebrewer to bring boiling wort down to yeast pitching temperature in a fraction of the time an ice bath takes.
2.The copper tubing, usually around 25-50 feet long, is formed into a large coil. As the cold water runs through the copper piping, the heat from the wort will transfer through the copper piping and into the cooler water running through it.
3.Our Wort Chiller works very fast, no need to recirculate your wort, doesn’t leak, and works well whether you use ice water or warm ground water.
3.This plate chiller like this offers top-notch heat exchange all in one coil-free, simple design. As plate chillers maximize surface area, your wort will receive the quickest cooling process known to man, even quicker than the average immersion chiller.
1.The new stainless steel wort plate chiller is a highly-efficient device.
2.This chiller is made of 30 plates of 304 stainless steel.
3.With 4 * 1/2"(12.7mm) outer diameter stainless steel barb fittings.
4.12mm innner diameter pipe connect nozzle.
Recommended Max Water Flow Rate: 15.5 gpm, Design Temperature: -195°C to +220°C (-319°F to 430°F)
Product Size: 7.5" x 2.9" x 2.92"(191 x 73 x 74.2 mm)
Heat Transfer Area/plate: 0.012m2(0.14ft2)
Thickness of plates: 0.3 mm(0.0118")
Max Flow Rate: 66.6L/min(17.6gpm)
Design Pressure:1.0 Mpa(145 psi)
Test Pressure: 2.0 Mpa(290 psi)
Refrigeration Capacity: 1-5 KW(3400-17000 BTU/hour)
1 x Homebrew Beer Wort Chiller